What is a quick connector on an excavator?


A fast connector on an excavator is also referred to as a quick change joint or a quick connection head. The quick connector enables rapid installation and replacement of various configuration components on the excavator

.

A fast connector on an excavator is also referred to as a quick change joint or a quick connection head. The quick connector enables rapid installation and replacement of various configuration components on the excavator, thereby increasing the excavator's usable range, saving time, and increasing working efficiency.

The Tilting Quick Coupler is a high-performance tuning coupler. Additionally, the excavator's various configurations (bucket, ripper, breaker, hydraulic shear, etc.) can be quickly attached and switched. Additionally, it is capable of 180 degrees. Rotating left and right enables the operator to more precisely position the accessories without repositioning the machine. As a result, overall productivity and versatility are increased.

 


The fast connector's overall structure is straightforward. The general fast connector head is supported by a support body that is a portable card block that can supply power for work. Additionally, an oil cylinder is present. However, high-speed connections make use of hydraulic cylinders, pins, and other components. The manufacturing process of fast joints is not simple, but also requires blanking, as well as passing through the car, drill, grinding, and other ninety-one difficult processes, in addition to sandblasting and other industries. However, this level of professionalism and dedication can result in high-quality products. High speed connectors enable large, seemingly unwieldy machines to be driven quickly, increasing their flexibility and efficiency of operation. Quick connectors are a broad term that encompasses a variety of accessories, including hydraulic pipe quick couplings and excavator Quick Hitch couplers.

 

Quick connector characteristics of excavators

1. the use of high-strength materials; suitability for all types of aircraft weighing between three and eight tons;

2. the use of a liquid control check valve as a safety device;

3. Because the excavator configuration components can be replaced without refitting or dismantling the pin shaft, installation is accelerated and work efficiency is increased significantly.

4. There is no need to smash the bucket pin between the crushing hammer and the bucket; the exchange can be completed by gently moving the switch for ten seconds, which saves time and effort and is simple and convenient.

5. It is primarily used in environments where the excavator's front-end working device must be replaced frequently. It is not necessary to install a device completely when using it for an extended period of time.

Comments